EDITED 4th November 2012
I have modified this template slightly
new post is HERE
EDITED 5th March 2014
I've made some using a faux leather
technique - much stronger
new post is HERE
I made these little holders from card to hold a few emery boards. They measure approximately 5" x 2" so are ideal to keep in your handbag or on your work desk for when you need to do a quick repair to your finger nail.
I used a textured white core cardstock, but any good quality card would do.
I've just realised that I've missed a couple of measurements off the template - the width is 2" (but it extends to 3" for the bottom part as shown). The two side flaps at the bottom measure 1/2" wide each (so the flaps are three and half inch long by a half inch wide). Sorry about that, but please don't hesitate to ask me if anything is still unclear.
To make the front a little more interesting, I textured it with my Big Shot die cutting machine using a Cuttlebug embossing folder.
I did a bit of rubber stamping inside and out.
Using an emery board (they're not only for nails!) I rubbed over the textured part to give a distressed look.
I sewed on two co-ordinating buttons - best to do this now before sticking the holder together!
Leave a tail of cotton on the top flap as this will be wound around the bottom button to become the fastener.
Using a glue stick, apply glue to the front of the two small flaps.
Stick the flaps to the underneath section and hold in place for a few minutes with some clothes pegs to ensure good adhesion.
Once firmly stuck down, insert a few emery boards into the pocket and you're good to go!
They are quick and easy to make and are nice little gifts to give to your family and friends - they would also make good Christmas stocking fillers.
Thanks for looking and if you do make any yourself, I'd love to see them!
